AT3、BT3、CT3、DT3型可调试弹簧减振器
AT3、BT3、CT3、DT3型可调试弹簧减振器
分享
  • 产品详情
  • 产品参数


注:

1、AT3为25mm挠度、CT3为75mm挠度、DT3为100mm挠度。

2、该型号出厂时已分别预压10mm、35mm、60mm、85mm。

3、配备有预压螺栓,可避免所承托设备在安装后,重量改变时,能有效控制设备提升高度,避免相关管路因设备提升而损坏。

4、当设备水平不一时,可调节高度中间栓,保持设备水平,并具有一定的抗震能力。

5、预压螺栓须于安装后确保没有碰到外壳件。

Lable:

1、The deflection of AT3 is 25mm、BT3 is 50mm、CT3 is 75mm、DT3 is 10mm.

2、The spring isolators are pre-compressed to 10mm、35mm、60mm、85mm、height repectively.

3、Hold down bolts limits the maxinium height of the spring isolator. These are used to prevent any damage of connected pipes due to machine load varies.

4、When the equipment level is different, the adjusted middle bolt can keep the same lever and prevent from shaking.

5、Make sure the holddown bolts do not touch the outer housing.

AT3型可调试弹簧减振器技术及外形尺寸表

AT3 SPRING ISLOLATOR TECHNICAL SPECIFICATIONS AND DIMENSIONS

型号 TYPE最大工作载荷 MAX SERVICE LOAD(kg)刚度 STIFFNESS (kg/mm)外形尺寸(DIMENSIONS)
LL1BDHMø
AT3-10100.41521206350130M10ø12
AT3-30301.21521206350130M10ø12
AT3-505021521206350145M10ø12
AT3-80803.21521206350158M12ø12
AT3-10010041521206350178M12ø12
AT3-15015061721408070181M12ø12
AT3-20020081721408070183M12ø12
AT3-3003001218815010080194M16ø14
AT3-4004001618815010080194M16ø14
AT3-5005002020016010090231M16ø14
AT3-60060024220180120100236M16ø14
AT3-80080032220180120100238M16ø14
AT3-1000100040296256165160256M20ø14
AT3-1200120048296256165160256M20ø14
AT3-1500150060296256165160258M20ø14
AT3-1600160064296256165160258M20ø14
AT3-1800180072296256165160258M20ø14
AT3-2000200080296256165160258M20ø14

BT3、CT3、DT3型弹簧减振器技术特性及外形尺寸表

BT3、CT3、DT3 SPRING ISOLATOR TECHNICAL SPECIFICATIONS AND DIMENSIONS

型号 TYPE最大工作载荷 MAX SERVICE LOAD(kg)刚度 STIFFNESS (kg/mm)外形尺寸(DIMENSIONS)
LL1BDHMø
BT3-5050119817010090209M10ø12
BT3-80801.619817010090211M12ø12
BT3-1001002230195120110216M12ø12
BT3-1501503230195120110216M12ø12
BT3-2002004230195120110218M12ø12
BT3-3003006260220140130231M16ø12
BT3-4004008260220140130231M16ø12
BT3-50050010260220140130273M16ø14
BT3-60060012260220140130273M16ø14
BT3-80080016260220140130275M16ø14
BT3-1000100020332290185180291M20ø14
BT3-1200120024332290185180291M20ø14
BT3-1500150030332290185180293M20ø14
BT3-1600160032332290185180293M20ø14
BT3-1800180036332290185180293M20ø14
BT3-2000200040332290185180293M20ø14
CT3-80801220190120100249M12ø12
CT3-1001001.3234204120120251M12ø12
CT3-1501502234204120120251M12ø12
CT3-2002002.7260220140130260M12ø12
CT3-3003004260220140130266M16ø14
CT3-4004005.3260220140130266M16ø14
CT3-5005006.6282242160140303M16ø14
CT3-6006008292252160150303M16ø14
CT3-80080010.7292252160150305M16ø14
CT3-1000100013.4364324210200321M20ø14
CT3-1200120016364324210200321M20ø14
CT3-1500150020364324210200323M20ø14
CT3-1600160021.3364324210200323M20ø14
CT3-1800180024364324210200323M20ø14
CT3-2000200026.7364324210200323M20ø14
DT3-80800.8230200120110256M12ø12
DT3-1001001264234140140263M12ø12
DT3-1501501.5325285180170273M12ø12
DT3-2002002325285180170295M12ø12
DT3-3003003325285180170301M16ø14
DT3-4004004325285180170301M16ø14
DT3-5005005325285180170331M16ø14
DT3-6006006325285180170331M16ø14
DT3-8008008325285180170333M16ø14
DT3-1000100010408368250230351M20ø14
DT3-1200120012408368250230351M20ø14
DT3-1500150015408368250230353M20ø14
DT3-1600160016408368250230353M20ø14
DT3-1800180018408368250230353M20ø14
DT3-2000200020408368250230353M20ø14

AT3、BT3、CT3、DT3(2400KG~6000KG)型可调式弹簧减振器技术特性及外形尺寸表

AT3、BT3、CT3、DT3(2400KG~6000KG)SPRING ISOLATOR TECHNICAL SPECIFICATIONS AND DIMENSIONS

型号 TYPE最大工作载荷 MAX SERVICE LOAD(kg)刚度 STIFFNESS (kg/mm)外形尺寸(DIMENSIONS)
LL1BDHMø
AT3-2400240096495455165200275M22ø14
AT3-30003000120495455165200275M22ø14
AT3-36003600144495455165200275M22ø14
AT3-40004000160495455165200275M22ø14
AT3-50005000200495455165200275M22ø14
AT3-60006000240495455165200275M22ø14
BT3-2400240048550510185220330M22ø14
BT3-3000300060550510185220330M22ø14
BT3-3600360072550510185220330M22ø14
BT3-4000400080550510185220330M22ø14
BT3-50005000100550510185220330M22ø14
BT3-60006000120550510185220330M22ø14
CT3-2400240032605565210240360M22ø14
CT3-3000300040605565210240360M22ø14
CT3-3600360048605565210240360M22ø14
CT3-4000400053.5605565210240360M22ø14
DT3-2400240024670630250260400M22ø14
DT3-3000300030670630250260400M22ø14
DT3-3600360036670630250260400M22ø14
DT3-4000400040670630250260400M22ø14